Product Overview
The MBB59GGR back bar cooler provides 17.3 cu. ft. of refrigerated storage for bottled and canned beverages. Two locking glass doors, interior LED lighting, and four adjustable epoxy-coated shelves keep products organized, visible, and accessible during service.
The two-section cabinet features stainless steel interior and exterior construction, electronic temperature control, and side-mounted self-contained refrigeration. Its R290 refrigeration system maintains temperatures from approximately 35F to 38F.
- 17.3 cu. ft. refrigerated capacity
- Two-section back bar design
- Two locking glass doors
- Four epoxy-coated shelves
- Stainless steel interior and exterior
- Electronic temperature controller
- LED interior lighting
- Side-mounted slide-out compressor assembly
- Environmentally responsible R290 refrigerant
- 2 in. pre-installed casters
- 57-4/5 in. wide by 28-1/10 in. deep
- 40-1/8 in. overall height
- 115V, 60 Hz, single-phase operation
- 1/7 HP compressor
- 2.3 amps
- NEMA 5-15P plug
- cETLus and ETL-Sanitation listed
- Clearance item
Condition & Purchase Notes
Included Items
Includes one MBB59GGR back bar cooler with two locking glass doors, four epoxy-coated shelves, electronic controls, interior LED lighting, and pre-installed casters.
Warranty Notes
The manufacturer lists a two-year parts and labor warranty and a five-year compressor part warranty. Contact Oswalt to confirm coverage for this clearance item.
Important Purchase Notes
Clearance item. Confirm the cabinet dimensions, electrical connection, ventilation clearances, doorway access, and delivery requirements before purchase. R290 refrigeration systems should be serviced only by qualified refrigeration technicians.
Specifications
Product details, dimensions, utility requirements, and technical information.
Family
Merchandiser
Material
Stainless Steel
Power Type
Electric
Power Requirements
115V, 60 Hz, 1 phase, 2.3A; NEMA 5-15P
BTU / Wattage / HP
1/7 HP
Dimensions
57.8 W x 28.1 D x 40.125 H in.
Door Type
Glass
Number Of Doors
2
Capacity
17.3 cu. ft.
Installation Notes
Place the cooler on a level surface and allow adequate ventilation around the side-mounted refrigeration system. Connect to a properly grounded 115V circuit that meets local electrical requirements. Confirm required clearances and doorway access before delivery.
Documents & Resources
Spec sheets, manuals, and supporting product information.Write Your Own Review